Medical Device Adhesives
MXBON Medical Device Adhesives
Usage
These Medical Device Adhesives, specifically developed for medical equipment, not only meet industry standards but are also optimized to address critical requirements including high stability, corrosion resistance, and long-term durability; tested in accordance with ISO 10993 biocompatibility standards, they represent the highest standards of safety and performance, delivering exceptional reliability and ensuring superior results in the production of medical devices ranging from surgical instruments and diagnostic equipment to other precision medical apparatus.
Characteristics
❯MXBON – 21401M
- Low viscosity, resistant to 121°C heat, surface insensitive
- Transparent and colourless, rapid curing.
- Suitable for the adhesion of most materials.
- Especially for bonding to insensitive surfaces and low-energy surfaces.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -21416M
- Medium viscosity, general-purpose, seam-filling capabilities
- Can be used for gap bonding of 0.2 mm.
- Suitable for bonding rough or irregular surfaces.
- Especially suitable for adhesion between plastic and rubber.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -22401M
- Low viscosity, resistant to 100°C high temperature, surface insensitive
- Transparent and colourless, rapid curing, low odour, low blooming.
- Suitable for the adhesion of most materials.
- Especially for bonding to insensitive surfaces and low-energy surfaces.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -22403M
- Medium viscosity, resistant to 100°C high temperature, surface insensitive
- Transparent and colorless, rapid curing, high strength, low odor, low blooming.
- Suitable for the adhesion between metal, plastic, and rubber.
- Especially for bonding to insensitive surfaces and low-energy surfaces.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -21443M
- Medium to low viscosity, light-curing cyanoacrylate adhesive
- Transparent light yellow, instantly cures, non-sticky surface.
- Double curing mechanism of light curing and moisture curing.
- Easy to apply for crevice filling and bonding.
- Especially for bonding to insensitive surfaces and low-energy surfaces.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -22455M
- Gel-like, resistant to 100°C high temperature, excellent gap-filling ability, surface insensitive
- Transparent and colorless, rapid curing, high strength.
- Suitable for vertical applications and filling large gaps.
- Capable of gap-filling and bonding up to 0.25 mm.
- Especially for bonding to insensitive surfaces and low-energy surfaces.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -22460M
- Low viscosity, resistant to 100°C high temperature, penetration type
- Transparent and colorless, rapid curing, high strength.
- Suitable for post-assembly application of adhesive for capillary infiltration adhesion.
- Suitable for porous, absorbent, and low surface energy materials.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -224902M
- Low viscosity, resistant to 100°C high temperature, ultra-flexible
- Transparent and colorless, rapid curing, Shore D55.
- High bonding strength, high sealant properties.
- Suitable for bonding high-flexibility medical devices.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
❯MXBON -22507M
- Medium to low viscosity, high strength, resistant to 100°C high temperature, low odour, low blooming
- Transparent and colourless, with good sealing properties.
- Flexible, able to buffer stress deformation of substrates.
- Particularly suitable for bonding TPE thermoplastic elastomer hoses to rigid plastics.
- Medium-strength bonding is achievable with inactive and low surface energy materials.
- Tested to ISO 10993 biological standards.
- Volume: 20 g / 500 g
