Anaerobic Bearing
Anaerobic Bearing Retainer Adhesive
Usage
The Retaining Compound Sealant Series is designed for assembling metal cylindrical components such as bearings, bushings, pins, hubs, and pulleys. It replaces costly methods like press-fitting and keyways with simpler, more efficient slip-fit solutions.
Characteristics
❯MXBON 12603
- High strength, press-fit
- Achieves initial curing within 10 minutes
- Oil tolerance, vibration resistance, and wear & corrosion resistance for metal parts
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 12620
- High strength, heat-resistant, non-dripping, slip-fit
- Heat resistance up to 230°C
- Achieves initial curing within 30 minutes
- High lubricity; prevents metal wear and corrosion
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 12638
- High strength, slip-fit
- Achieves initial curing within 5 minutes
- Impact resistant with excellent chemical resistance
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume: 50 ml / 250 ml / 1000 ml
❯MXBON 12609
- Press-fit
- Medium-high strength, low viscosity, fixture in 10 minutes.
- Use for variety of different metals
- Use for casing, pulley gear shaft and repair insufficient processing parts.
- Volume: 50 ml / 250 ml / 1000 ml
❯MXBON 12648
- High strength, press-fit
- Achieves initial curing within 5 minutes
- Applicable to work pieces made of passivated materials such as stainless steel
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
❯MXBON 12680
- High strength, slip-fit
- Achieves initial curing within 10 minutes
- Suitable for fixing sleeves, pulleys, gears, shaft fittings, and repairing defective components
- Volume:50 ml / 250 ml / 1000 ml
Technical Information
| Item No | Usage | Appearance | Viscosity (cps) | Cure Speed (min) | Gap fill (mm) |
| 12603 | Low Viscosity | Green | 100~150 | 10 min | 0.05 |
| 12609 | Low Viscosity | Green | 100~150 | 10 min | 0.05 |
| 12620 | High Temperature | Green | 5,000~12,000 | 30 min | 0.38 |
| 12638 | Slip Fit | Green | 2,000~3,000 | 5 min | 0.25 |
| 12648 | Press Fit | Green | 400~600 | 5 min | 0.15 |
| 12680 | Slip Fit | Green | 1,250~2,000 | 10 min | 0.4 |
